| 焊接专业英语词汇(5) |
|
| 日期：2007-9-3 22:04:43 人气：259 [大 中 小] |
|
|
|
钎剂膏 flux paste
阻流剂 stopping-off agent
钎剂活性 flux activity
钎剂活性温度范围 activation temperature range of flux
钎剂热稳定性thermal stability of flux
钎焊过程 brazing (soldering) process
钎焊操作 brazing (soldering) operation
工艺镀层 technological coating
钎焊面 faying face
钎缝间缝 joint gap; joint clearance
钎焊参数 brazing process variables
钎焊温度 brazing temperature
钎焊时间 brazing time
钎焊保温时间 holding time of brazing
钎缝 brazing seam; soldering seam
钎缝界面区 interfacial region
钎缝金属 brace metal
钎角 fillet
钎焊接头 braced joint; soldered joint
平面搭接头 joggled lap joint; flush lap joint
搭接对接接头 butt and lap joint
搭接T形接头 lapped T-joint; flanged T-joint
锁缝接头 folded joint
平面锁缝接头 lick side seam joint; flat lock seam joint
锁缝角接接头 lock corner joint; corner double seam
嵌入T形接头 inset T joint
T形管接头 branch T saddle joint
套管接头 socket joint
外喇叭口套管接头 flare tube fitting
扩口套管接头 spigot joint
钎焊性 brazability; solderability
润湿性 wettability
润湿角 wetting angle; contact angle
铺展性 spreadability
铺展系数 spread factor; coefficient of spreading
钎着率 brazed rate
脱钎 de-brazing; de-soldering
润湿称量试验 wetting balance test
铺展性试验 spreadability test
填缝性试验 clearance fillability test
未钎透 incomplete penetration
虚钎 cold soldered joint
钎料熔析 liquation of filler metal
溶蚀 erosion
钎料流失 brazing filler metal erosion
钎剂夹杂 flux inclusion
晶间渗入 intergranular penetration
波峰钎焊机 wave soldering machine
冷壁真空钎焊炉 cold wall type vacuum brazing
热壁真空钎焊炉 hot wall type vacuum brazing furnace
钎焊盒 brazing retort
钎剂涂敷器 fluxer
钎炬 brazing (soldering) blowpipe
喷灯 brazing lamp
烙铁 solder iron
热喷涂 thermal spraying
火焰喷涂 flame spraying
电弧喷涂 electric arc spraying
等离子喷涂 plasma spraying
高频感应喷涂 high frequency spraying
气体爆燃式喷涂 detonation flame spraying
金属喷涂 metal spraying; metallizing
塑料喷涂 plastic spraying
陶瓷喷涂 ceramic spraying
喷熔 spray-fusing
表面粗糙化处理 surface roug[page_break]hening
电火花拉毛 electrospark roughening
抛锚效应 anchoring
喷涂层 spray-fused coating
喷熔层 spray-fused coating
结合层 bond coating; under coating
工作层 work coating
结合强度 adhesive strength
涂层强度 strength of coating
封孔处理 sealing
封孔剂 sealant
喷涂率 spray rate
沉积效率 deposition efficiency
孔隙率 porosity
喷涂材料 spraying material
自熔剂合金粉末 self-fluxing alloy powder
喷炬（枪）spray torch;
热切割 thermal cutting (TC)
气割 gas cutting; oxygen cutting
氧溶剂切割 powder cutting
氧-石英砂切割 quartz powder cutting
电弧切割 arc cutting
氧气电弧切割 oxy-arc cutting
空气电弧切割 air arc cutting
等离子弧切割 plasma arc cutting (PAC)
空气等离子弧切割 air plasma arc cutting
氧等离子切割 oxygen plasma arc cutting
水再压缩空气等离子弧切割 air plasma water injection arc cutting
双层气流等离子弧切割 dual gas plasma arc cutting; shielded gas plasma arc cutting
|
|
|
| 我有问题，我要进入论坛 |
| 出处：本站原创 作者：佚名 | |
|
